page . 1 stad-feb.04.2009 1 pg4001-au ~ pg4007-au glass passivated junction rectifier notes: 1. measured at 1 mhz and applied reverse voltage of 4.0 vdc. * jedec registered value voltage 50 to 1000 volts current 1.0 amperes maximum ratings and electrical characteristics ratings at 25c ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. features ? plastic package has underwriters laboratory ? flammability classification 94v-o utilizing flame retardant epoxy molding compound. ? exceeds environmental standards of mil-s-19500/228 ? lead free in comply with eu rohs 2002/95/ec directives ? acqire quality system certificate : ts16949 ? aec-q101 qualified mechancal data ? case: molded plastic, jedec do-41 ? terminals: axial leads, solderable per mil-std-750,method 2026 ? polarity: color band denotes cathode ? mounting position: any ? weight: 0.012 ounce, 0.3 gram. parameter symbol pg4001-au pg4002-au pg4003-au pg4004-au pg4005-au pg4006-au pg4007-au units maximum recurrent p eak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc b locking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward current .375"(9.5mm) lead length at t a =75 o c i f(av) 1.0 a peak forward surge current : 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 30 a maximum forward voltage at 1.0a v f 1.1 v maximum dc reverse current at rated dc blocking voltage t j =25 o c t j =100 o c i r 1.0 50 a typical junction capacitance (note 1) c j 15 pf typical thermal resistance r ja 50 o c / w operating and storage temperature range t j ,t stg -55 to +150 o c 0.034(0.86) 0.028(0.71) 0.107(2.7) 0.080(2.0) 1.0(25.4)min. 0.205(5.2) 0.160(4.1)
page . 2 stad-feb.04.2009 1 pg4001-au ~ pg4007-au rating and characteristic curves fig.1-forward currentderating curve fig.4-maximumnon - repetitivesurgecurrent fig.5-typicaljunctioncapacitance fig.3-typicalreversecharacteristic instantaneous reverse current ,ua percentage of peak reverse voltage,% peak forward surge current , amperes no. of cycle at 60hz 40 35 30 25 20 15 10 5 0 12 51020 50100 capacitance, pf reversevoltage, volts 1 0.1 0.4 1.0 4 10 40 100 2 20 4 40 6 60 10 100 averageforwardrecitified currentamperes 2.5 2.0 1.0 0 0.5 1.5 0 20 40 60 80 100 120 140 160 ambient temperaure, c o 0.01 20 40 60 80 100 120 140 0.1 1.0 10 100 t=125 c o j t=100c j o t=25c j o t=25c j o 100 40 20 10 4.0 2.0 1.0 0.4 0.2 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.4 fig.2-typical instantaneous forward characteristics instantaneous forward voltage, volts instantaneous forward current, amperes
part no_packing code_version pg4001-au_ay_000a1 pg4001-au_ay_100a1 pg4001-au_b0_000a1 pg4001-au_b0_100a1 pg4001-au_r2_000a1 pg4001-au_r2_100a1 for example : rb500v-40 _ r2 _ 00001 part no. serial number version code means hf packing size code means 13" packing type means t/r packing code xx version code xxxxx packing type 1 st code packing size code 2 nd code hf or rohs 1 st code 2 nd ~5 th code tape and ammunition box (t/b) a n/a 0 hf 0 serial number tape and reel (t/r) r 7" 1 rohs 1 serial number bulk packing (b/p) b 13" 2 tube packing (t/p) t 26mm x tape and reel (right oriented) (trr) s 52mm y tape and reel (left oriented) (trl) l panasert t/b cathode up (pbcu) u forming f panasert t/b cathode down (pbcd) d pg4001-au ~ pg4007-au page . 3 stad-feb.04.2009 1
disclaimer z reproducing and modifying information of the document is prohibited without permission from panjit international inc.. z panjit international inc. reserves the right s to make changes of the content herein the document anytime without notific ation. please refer to our website for the latest document. z panjit international inc. disclaims any and a ll liability arising out of the application or use of any product including damages inci dentally and consequentially occurred. z panjit international inc. does not assume any and all im plied warranties, including warranties of fitness for particular pur pose, non-infringement and merchantability. z applications shown on the herein doc ument are examples of standard use and operation. customers are responsible in co mprehending the suitable use in particular applications. panjit international inc. make s no representation or warranty that such applications will be suitable for the specified us e without further testing or modification. z the products shown herein are not desi gned and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera . customers using or selli ng these products for use in such applications do so at their own risk and agree to fully indemnify panjit international inc. for any damages result ing from such improper use or sale. pg4001-au ~ pg4007-au page . 4 stad-feb.04.2009 1
|
